Creates an analytic cut cone object.
Specify options in the Control Bar.
Define the bottom circle of the cut cone by clicking two or three points on a View window depending on the Define option.
Define the top circle by clicking two points on a View window.
The Cut Cone tool has the following options:
- Define - How the cut cone is defined. The choices are:
- Center & Radius
- Center & Axes
- Corner & Corner
- Three points in arc
- Center & Corner
- Filled - If not checked the top and bottom lids of the cut cone are not created.
- Arc - If checked creates a cut cone sector.
- Center - If checked, the top will be centered over the bottom.